White Hypoallergenic FFP2 Particle Filtering Half Mask
Product Description
Polypropylene outer layer provides smooth lining and avoids loose
fibres.
Embossed fringe seal avoids fluffy open layer around the edges.
Latex-Free synthetic rubber headstrap.
Contour design ensures the compatibility of glasses/goggles and
reduces fogging.
Soft nose foam and adjustable nosepiece ensure custom shape and
increase the worker comfort and acceptance.
Light wear and comfortable. Contour fit.Easy breathing/Speaking.
Clear vision. Free maintenance (disposable item).
Product Name | Particle Filtering Half Mask |
| Executive Standard | CE 2834 EN149 FFP2 |
Color | White |
Size | 15.5 * 10.5cm (customizable) |
Material quality | Non-woven fabrics, Melt blown fabric. |
Scope of application | Medical, food, electronic and other fields. |
Storage method | Sealed, Normal Temperature, Dry, Avoid Sunlight Preservation. |
User instructions
Failure to follow the instructions and warning on the use of this
mask during all times of exposure can reduce the effectiveness of
the mask and could result in illness or disability.
As with any respiratory device, the wearer must be adequately
trained prior to use. Before use, the wearer should always check
the mask is in good condition- no dirt, no damage to headharness
attachment etc
Limitation:
Do not use the respirator or enter or stay in a contaminated area
under the following circumstances:
a Atmosphere contains less than 19.5% oxygen.
b If you smell or taste contaminant.
c For protection against gases or vapors.
d Contaminants or their concentrations are unknown or immediately
dangerous to life or health.
e For sandblasting, paint-spray operations and asbestos treatment.
f In explosive atmospheres.
Warning:
1 This mask marked “NR”, shall not be used for more than one shift.
2 Never substitute, modify, add, or omit parts in the configuration
as specified by the manufacture.
3 This mask helps protect against certain particulate contaminants
but does not completely eliminate exposure to the risk of
contracting disease or infection.
4 It is unlikely that the requirements for leakage will be achieved
if facial hair passes under the face seal.
5 Change the mask immediately if breathing becomes difficult or the
mask becomes damaged or distorted.
6 Change the mask if a proper face seal cannot be achieved.
